Digital Identity is Under Attack: FIDO Paris Seminar.pptx
EIGRP 15 min theory cheat sheet
1. - EIGRP -
15 min theory cheat sheet
-RISHABH DANGWAL-
Name: Enhanced Interior Gateway Routing Protocol Standard: Cisco Proprietary
Supported Protocols: IP, IPX, Appletalk Transport Protocol: IP
Routing Protocol Type: Hybrid Algorithm: DUAL
Internal AD: 90 External AD: 170
Route Summarization: Yes (auto by default) RTP: Reliable Transport Protocol
EIGRP Load Balancing : default 4, Max 6 Hop Count: default 100, max 255
Neighbour Discovery: Auto (multicast/unicast) Multicast IP: 224.0.0.10
Timers
Hello Timers: 5 seconds (high speed links) ,60 seconds (wan links 1.5mb and lower)
Dead Timers: 15 seconds (high speed links) ,180 seconds (wan links 1.5mb and lower)
Terms
Feasible Distance (FD): Metric based on local route to destination metric
Reported Distance (RD): Metric based on the neighbours metric to the destination metric
Successor : Lowest FD to the destination
Feasible Successor (FS): Backup to destination if feasibility condition is met
Feasibility Condition: If a non-successor route’s RD is less than the FD, the route is a FS
Route States
Passive State: Route is reachable Active State: Unreachable, no FS exits
EIGRP Protocol Messages
HELLO,UPDATE (sent reliably via RTP),QUERY (sent reliably via RTP),REPLY (sent reliably via
RTP), ACK (acknowledgement)
METRICS
K Metrics: (K1)Bandwidth, (K2)Load, (K3)Delay, (K4)Reliability & (K5)MTU
Default Metric: Metric = 256 * ((10^7 / lowest bandwidth in path) + Cumulative Delay)
Full K weights: Metric = 256*((K1*Bw) + (K2*Bw)/(256-Load) + K3*Delay)*(K5/(Reliability +
K4)))
Stuck in Active
During active state, when an EIGRP speaking router doesn’t gets an EIGRP reply to a query within 3
min, the route will become stuck in active (SIA), neighbour relationship is reset and learning
process will start again. In IOS version 12.2 or higher, after 90 seconds a second SIA message is
sent as SIA Query which helps to prevent the route from going SIA in case the neighbour relationship
is still up but a response was not received. To avoid it (generally), either use Passive Interfaces,
Stubs or Summarise properly.
EIGRP Stub Options
Connected: Advertise connected routes for interfaces matched with the network command
Summary: Advertise auto-summarized or manually configured summary routes
Redistributed: Advertise routes learned from configured redistribution
Receive-only: No routes are advertised
Static: Advertise static routes but must be used with the “redistribute static” command
Please send feedback at admin@theprohack.com
www.theprohack.com